Custom Printing Glossary: A to Z of Print Terms Explained
Share
Order custom printing for the first time and the jargon arrives fast. Your printer asks for a vector file, the product page talks about GSM, someone mentions bleed, and a forum post says your design needs an underbase. None of it is complicated once explained.
This glossary covers the words you're most likely to meet when ordering printed t-shirts, hoodies, bags, hats and personalised gifts, in plain English from people who print every day. Bookmark it and share it with your club or team.
Quick answer
The handful of terms that matter most: a vector file (AI, EPS, SVG or vector PDF) stays sharp at any size; a raster image (PNG or JPG) needs to be high resolution, ideally 300 dpi at print size; GSM is fabric weight; a mockup is the preview you approve before printing; and MOQ is a minimum order quantity (we don't have one). Everything else is below, A to Z.

A to D
Artwork
The design file you supply for printing: a logo, an illustration, a photo or text. "Print-ready artwork" means it needs no further work before it goes to print. If yours isn't, tidying it is a normal part of the job.
Blank
An unprinted garment or product, such as a plain t-shirt or mug, before your design goes on it.
Bleed
Extra artwork that runs past the edge of the final print area, so there's no thin white line if the cut or placement shifts slightly. It matters most for edge-to-edge prints such as photo mugs and coasters; a chest logo on a t-shirt doesn't need it.
Bulk discount
A lower price per item for bigger orders. Ours applies to custom printed garments: 5% off 20 or more, 10% off 50 or more and 20% off 100 or more, and mixing styles, colours and sizes still counts.
CMYK and RGB
Two ways of describing colour. RGB (red, green, blue) is how screens make colour; CMYK (cyan, magenta, yellow, black) is how most printers mix ink. Very bright screen colours can look slightly calmer in print.
DPI (dots per inch)
A measure of how much detail a raster image holds at a given size. 300 dpi at the size you want printed is the usual target. A small web image can look blocky when enlarged to a full chest print.
DTF (direct-to-film)
A printing method where the design is printed onto a special film, coated with adhesive powder, then heat pressed onto the garment. It handles full colour and fine detail, works on cotton, polyester and blends, and suits small runs.
DTG (direct-to-garment)
A method that prints ink straight onto the fabric, much like an inkjet printer on paper. It works best on high-cotton garments.
F to L
Fit
The shape of a garment: regular, relaxed, oversized, slim or fitted. Always check the size chart. Our guide to sizing, fits and ordering the right size mix goes deeper.
GOTS and Oeko-Tex
Common accreditations on blanks. GOTS (Global Organic Textile Standard) certifies organic fibres through the supply chain; Oeko-Tex Standard 100 means the textile has been tested for harmful substances.
GSM (grams per square metre)
Fabric weight. Roughly, 150gsm is a light tee, 180 to 190gsm is a solid everyday shirt and 200gsm or more feels heavy and structured. Hoodies sit much higher. See what GSM means for the full explanation.
Heat press
The machine that applies heat and pressure to bond a transfer (such as DTF) to a garment, or to sublimate a design onto a mug or coaster.
Left chest
The classic small logo position, over the heart. It's the most popular spot for workwear and club kit, often paired with a bigger print on the back. Our print placement guide covers every position.
From the print room
If you only learn two words from this page, make them vector and mockup. Ask whoever designed your logo for the vector version (it's often sitting in an old email), and read your mockup properly before you approve it: check spelling, names, sizes and colours, because the mockup is what we print.
M to R
Mockup (or proof)
A visual preview showing your design on the chosen product, colour and position. We send a free mockup within 1 to 4 working days of your order, and nothing is printed until you approve it.
MOQ (minimum order quantity)
The smallest number of items a printer will accept. Some printers set an MOQ of 10, 25 or more; we have no minimum, so a single shirt is fine.
Pantone (PMS)
A standard numbered colour system used to describe exact brand colours. If your brand guidelines list a Pantone reference, include it with your artwork so the colours can be matched as closely as the print method allows.
Print area
The maximum space a design can fill on a product. On garments we price prints by size: logo or small up to 15 × 15 cm (£4.50), large up to 34 × 20 cm (£6) and XL up to 34 × 50 cm (£7), with no setup fee.
Raster
An image made of pixels, such as a PNG, JPG or photo. Raster files print well when they're large enough, but they can't be enlarged without losing quality. Compare with vector.
Ringspun cotton
Cotton yarn that is twisted and thinned to make it smoother and softer than standard cotton. The result is a softer shirt with a smoother surface for printing.

The same design in dark ink on a white tee and light ink on a green hoodie: contrast decides how a print reads.
S to Z
Screen printing
A traditional method that pushes ink through a mesh screen, one screen per colour. It's very durable and economical on large runs of simple designs, but the setup makes it less suited to small orders or full-colour photos.
Setup fee
A one-off charge some printers add for preparing screens or artwork. We don't charge one.
Sublimation (dye sublimation)
A process where heat turns special ink into a gas that bonds into polyester fabric or a polymer coating. It's how photo mugs, coasters and many personalised gifts are made. It only works on suitable white or light surfaces, which is why sublimation gifts are usually white.
Transparent background
Artwork saved without a solid background behind it, usually as a PNG. Without one, a white box can appear around your logo on a coloured shirt.
Turnaround
How long an order takes. With us, printed clothing is dispatched 3 to 8 working days after mockup approval, and personalised gifts and sublimation items 3 to 15 working days. UK delivery is £3.50.
Underbase
A layer of white printed beneath the colours on a dark garment, so they stay bright rather than sinking into the fabric.
Vector
Artwork built from mathematical lines and shapes rather than pixels, so it scales to any size without going blurry. AI, EPS, SVG and vector PDF are the usual formats. Our guide on how to prepare a logo for clothing printing explains how to find or make one.
Which file should I send?
| File type | Vector or raster | Good for print? |
|---|---|---|
| AI, EPS, SVG | Vector | Ideal: sharp at any size |
| Either | Ideal if saved from design software as vector | |
| PNG | Raster | Good if high resolution with a transparent background |
| JPG | Raster | Fine for photos; logos may need tidying |
| Screenshot or phone photo | Raster | Send it anyway; we'll tell you what's usable |
Before you order: a quick checklist
☐ I know which product, colours and sizes I want
☐ I have the best version of my artwork I can find (vector if possible)
☐ I've chosen print positions and sizes (logo, large or XL)
☐ I've noted any Pantone or brand colours
☐ I've counted the order for the bulk discount (20, 50 or 100+)
☐ I've checked the turnaround against my deadline
☐ I'll read the mockup carefully before approving

FAQs
Do I need a vector file to order?
No. A vector file is ideal, but a high-resolution PNG or JPG works well too, and if all you have is a screenshot or a sketch, send it and we'll advise.
Why does my design look different on a dark shirt?
Ink colours interact with the garment colour. Dark shirts need light or bright designs (printed over a white underbase) to stand out, and the mockup will show you how it reads.
Is there a minimum order?
Not with us. You can order one item, and bulk discounts on custom printed garments start at 20.
Can I link to this glossary?
Yes, you're welcome to link to it from your club, school or business pages.
Ready to put the jargon to use?
Browse our custom t-shirts, upload whatever artwork you have, and we'll send a free mockup before anything is printed. For larger orders, get a quote, or find more answers in our help centre.
Website: theinnersanctumgroup.co.uk | Email: printing@theinnersanctumgroup.co.uk | Tel: 07572 810763